|
|
STUDY ON TECHNOLOGICAL PARAMETERS OF EMC PROCESSING IN Al ALLOYS |
JIN Junze; ZHANG Xingguo; CAO Zhiqiang ;ZHU Xiaoying (Dalian University of Technology)(Correspondent:Director Professor;The Engineering Research Center of Foundry;Dalian University of Tech nology;Dalian 116023) |
|
Cite this article:
JIN Junze; ZHANG Xingguo; CAO Zhiqiang ;ZHU Xiaoying (Dalian University of Technology)(Correspondent:Director Professor;The Engineering Research Center of Foundry;Dalian University of Tech nology;Dalian 116023). STUDY ON TECHNOLOGICAL PARAMETERS OF EMC PROCESSING IN Al ALLOYS. Chin J Mater Res, 1996, 10(4): 397-400.
|
Abstract By an approximate calculation method, the electric current, voltage,impedance as well as power during EMC process were estimated. As a result, a generator type was chosen. The device of EMC,such as inductor, was designed and set up. The aluminum and alumi
|
Received: 25 August 1996
|
1LaversJDLEEEConfRecIEEE—IAS15thAnnuMeeting,NewzYork:IEEEInc,1980:9492LaversJDLEEEConfRecIEEE-IAS17thAnnuMeeting,NewYork;IEEEInc,1982:9543ShigeoASAI.ISIJInternational,1989、29(12):9814OshimaS.In:ShigeoASAI,OshimaSeds.ElectromagneticProcessingofMaterials,Tokyo,Osaka:ISIJ,1993:195潘天明.工频和中频感应炉,北京:冶金工业出版社,1983:2036朱晓鹰,金俊泽.轻金属,1980,(4):607张维平,金俊泽.大连理工大学学报,1991,31(4):419P |
No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|