|
|
|
| SIMULATION OF THE SOLIDIFICATION AND HEAT TRANSFER OF THE LIQUID EXTRUSION PROCESS |
| LI Hejun ; QI Lehua (Northwestern Polytechnical University)REN Xiangqian (Wuhan Institute of Water Transport Engineering)LUO Shoujing; HUO Wencan (Harbin Institute of Technology) |
|
Cite this article:
LI Hejun ; QI Lehua (Northwestern Polytechnical University)REN Xiangqian (Wuhan Institute of Water Transport Engineering)LUO Shoujing; HUO Wencan (Harbin Institute of Technology). SIMULATION OF THE SOLIDIFICATION AND HEAT TRANSFER OF THE LIQUID EXTRUSION PROCESS. Chin J Mater Res, 1994, 8(6): 507-513.
|
|
|
Abstract Liquid extrusion process, which has been newly developed, can form tube, bar or shape products by only the single process. The process possesses the characteristics of the liquid metal forging and the solid extrusion, including crystallization under pres
|
|
Received: 25 December 1994
|
| 1李贺军,金属液体凝固过程中直接挤压的研究,哈尔滨工业大学博士学位论文,1991．112LiHejun,LuoShoujing,QiLehua．JofMaterialsProcessingTechnology,1992;32:4893LallyB,BieglerL,HeneinHMetalTran,1990;21B:7614任向前,陈炳光．武汉水运工程学院学报,1990;(1):105王铎,霍文灿,张锦生兵器材料科学与工程,1988;(2):146轻金属材料手册编写组轻金属材料加工手册．北京:冶金工业出版社,1991;13—20 |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
