FABRICATION AND PORE STRUCTURE CONTROL OF NEW TYPE ALUMINIUM FOAMS

Chin J Mater Res

1994, Vol. 8

Issue (1): 11-17 DOI:

论文

Current Issue | Archive | Adv Search

FABRICATION AND PORE STRUCTURE CONTROL OF NEW TYPE ALUMINIUM FOAMS

MA Liqun; HE Deping(Southeast University)

Cite this article:

MA Liqun; HE Deping(Southeast University). FABRICATION AND PORE STRUCTURE CONTROL OF NEW TYPE ALUMINIUM FOAMS. Chin J Mater Res, 1994, 8(1): 11-17.

Download:

PDF(1269KB)
Export: BibTeX | EndNote (RIS)

Abstract

Metallic foams are porous metals with large pore diameters and high porosities. Two common methods to fabricate metallic foams are foaming technique and low pressure Permeating. But neither of them can control the pore structures of metallic foams precise

Key words: : aluminium foams metallic foams pore structure Permeating

Received: 25 February 1994

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1994/V8/I1/11

1DaviesGJ．JMaterSci,1983;18(7):18992何德坪,陈锋等．材料导报,1993;74(4):113长田纯夫表面,1989;27(8):6794张勇材料科学进展,1993;7(6):4735马立群东南大学硕士学位论文,19916何德坪,陈锋CN89102473．5,1993

[1]	Xiaolu GUO,Liang WU,Huisheng SHI. Effects of Different Heavy Metals on Fly Ash-based Geopolymer[J]. 材料研究学报, 2017, 31(6): 437-444.
[2]	Xiaolu GUO,Huisheng SHI. Durability and Pore Structure of Nano-particle-modified Geopolymers of Waste Brick Powder-class C Fly Ash[J]. 材料研究学报, 2017, 31(2): 110-116.
[3]	Yugeng LI,Qinglin JIN,Tianwu YANG,Zaijiu LI. Influence of Solidification Rate on Pore Structure of Lotus-type Porous Metals[J]. 材料研究学报, 2014, 28(6): 476-480.
[4]	HOU Jiaojiao^ MEI Fuding. Research on Relationship between Macroscopic Properties and Pore Sturcture of Phosphogypsum-based Material**[J]. 材料研究学报, 2013, 27(6): 631-640.
[5]	GAO Fangliang LI Shengying CHEN Hongji WU Zhonghua LI Zhihong. Pore Structural Analysis on Poly(Methyl)silsesquioxane Porous Thin Films by Synchrotron Radiation Small Angle X–ray Scattering[J]. 材料研究学报, 2012, 26(1): 68-72.
[6]	GAO Kun LUO Yunjun LI Guoping WANG Lu CHEN Renjie LI Nianke. Effect of SiO₂ Addition on the Properties of Fe₂O₃-SiO₂ Binary Composite Xerogels[J]. 材料研究学报, 2011, 25(5): 464-468.
[7]	LIU Liheng GU Min XIAN Xuefu YU Jiangtao. Effect of Binders on CH4/N2 Performances of Granular Activated Carbons by Pressure Swing Adsorption[J]. 材料研究学报, 2011, 25(3): 249-254.
[8]	DU Lijun QIN Wei JIANG Binbo WU Wenqing WANG Jingdai YANG Yongrong. Preparation and Characterization of Silica/Poly (Styrene–co–acrylic Acid) Core–shell Composite Particles[J]. 材料研究学报, 2010, 24(2): 182-186.
[9]	HE Siyuan GONG Xiaolu HE Deping. Effect of “through-hole” on porous aluminum alloy compressive mechanical properties[J]. 材料研究学报, 2009, 23(4): 380-386.
[10]	LIU Weiwei HE Siyuan HUANG Ke HE Deping. Sound absorption of periodic porous aluminium with controlled pore structures[J]. 材料研究学报, 2009, 23(2): 171-174.
[11]	TANG Jiamiao;ZHU Congshan;XIA Haiping (Shanghai Institute of Optics & Fine Mechanics;The Chinese Academy of Sciences; Shanghai 201800)FAN Wenhao;WU Dong;SUN Yuhan(State Key Labomtory of Coal Conversion; Shanxi Institute of Coal Chemistry; The Chinese Acad. EFFECT OF PEG ON PARTICAL DISTRIBUTION AND PORE STRuCTURE IN SILICA SOL AND GEL[J]. 材料研究学报, 1998, 12(1): 79-82.
[12]	HE Deping; MA Liqun; YU Xingquan (Southeast university). THE HEAT TRANSFER CHARACTERISTIC OF FOAMED METAL WITH OPEN PORE[J]. 材料研究学报, 1997, 11(4): 431-434.
[13]	SONG Zhenlun; HE Deping (Southeast University). EFFECTS OF VISCOSITY ON PORE STRUCTURE IN FOAMING PROCESS OF MOLTEN ALUMINUM[J]. 材料研究学报, 1997, 11(3): 275-279.
[14]	HE Deping;YU Xinquang(Southeast University). EFFECT OF PORE STRUCTURE PARAMETERS ON THE NON~LINEAR DAMPING CAPACITY OF NEW TYPE FOAMED ALUMINIUM WITH OPEN PORE STRUCTURE[J]. 材料研究学报, 1997, 11(1): 101-103.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed