|
|
|
| 用放电等离子技术烧结TiB2陶瓷 |
| 张东明;逄婷婷;唐田;傅正义 |
| 武汉理工大学材料复合新技术国家重点实验室 |
|
引用本文:
张东明; 逄婷婷; 唐田; 傅正义 . 用放电等离子技术烧结TiB2陶瓷[J]. 材料研究学报, 2001, 15(4): 482-486.
1 WANG Xin,SUN Kangning,YIN Yansheng,HOU Yaoy- ong,ZHOU Yu,Progress of study on ceramic-matrix nanocomposites,Acta Materiae Compositae Sinica., 16(1),105(1999) (王昕，孙康宁，尹衍升，候耀永，周玉，纳米复合陶瓷材料研究进展，复合材料学报，16(1)，105(1999))
2 ZANG Jianbing,WANG Mingzhi,WANG Yanhui,HAN Wei,Structure and properties of Si_3N_4 bond polycrys- talline cubic boron nitride toughened with ZrO_2(Y_2O_3), Chinese Journal of Materials Research,14(6),595(2000) (藏建兵，王明智，王艳辉，韩伟，ZrO_2(Y_2O_3)增韧的Si_3N_4中介结合的聚晶立方氮化硼，材料研究学报，14(6)，595(2000))
3 K.Tajima,H.J.Hwang,M.Sando,Electric-field-induced crack growth bahavior in PZT/Al_2O_3 composites,J.Am. Ceram.Soc.,83,651(2000)
4 K.B.Alexander,P.F.Becher,B.Shirley,grain growth kinet- ics in alumina-zirconia(CeZTA)composites,J.Am.Ce- ram.Soc.,77,939(1994)
5 K.J.Niihara,New design concept of structural ceramics: ceramic nano-composites.J.Am.Ceram.Soc.,75, 2363(1992)
6 LIANG Kaiming,GU Koufen,GU Shouren,SUN Chuan- shui,Toughening mechanisms and fracture characteristics of ZrO_2 in ZTA ceramics,Journal of the Chinese Ceramic Society,23(5),477(1995) (梁开明，顾扣芬，顾守仁，孙传水，ZTA陶瓷ZrO_2的韧化机制与断裂特征，硅酸盐学报，23(5)，477(1995))
7 SUN Lihong,ZHU Qifang,WANG Ruikun,DONG Limin, ZHANG Baoqing,SHEN Huizhu,ZHANG Xishun,Study on frature behavior of Si_3N_4 base composite ceramics adding SiC nano-powders and SiC whiskers,Chinese Jour- nal of Rare Metals,24(5),330(2000) (孙丽虹，朱其芳，王瑞坤，董利民，张宝清，沈惠珠，张希顺，SiC纳米及晶须增强Si_3N_4基复相陶瓷断裂行为的研究，稀有金属，24(5)，330(2000))
8 ZHAO Hongliang,LOU Langhong,HU Zhuangqi,Prepa- ration and properties of Al_2O_3/SiO_2 ceramic core Nano- composites,Chinese Journal of Materials Research,16(6), 650(2002) (赵红亮，楼琅洪，胡壮麒，Al_2O_3／SiO_2纳米复合陶瓷型芯材料的制备与性能，材料研究学报，16(6)，650(2002))
9 YU Xuegang,WANG Xin,SHAN Yan,XU Jing,YIN Yan- sheng,Influence of liquid sintering on microstructure and properties of ZTA micro-nano composites,Transactions of Materials and Heat Treatment,24(2),5(2003) (于薛刚，王昕，单妍，徐静，尹衍升，液相烧结对微-纳复合ZTA陶瓷组织性能的影响，材料热处理学报，24(2)，5(2003))
10 XIONG Yan,FU Zhengyi,WANG Yucheng,Fabrication of transparent AlN ceramics by spark plasma sintering, Chinese Journal of Materials Research,19(5),555(2005) (熊焰，傅正义，王玉成，放电等离子烧结制备透明AlN陶瓷，材料研究学报，19(5)，555(2005))
11 ZHAN Guodong,ZHOU Yang,XU Mingying,ZHANG Yizeng,Crack propagation in ceramic matrix composite under cyclic loads,Chinese Journal of Materials Research, 8(5),473(1994) (詹国栋，周洋，徐明英，张以增，陶瓷基复合材料(SiC_w／Y- TZP)在循环压应力下的疲劳裂纹扩展，材料研究学报，8(5)，473(1994))
12 ZHU Ping,LIN Zhongqin,CHEN Guanlong,Ikeda Kiy- ohiko,Behavior of crack propagation in some bio-ceramics, Chinese Journal of Materials Research,16(5),479(2002) (朱平，林忠钦，陈关龙，池田清彦，几种生物陶瓷材料的裂纹扩展特性，材料研究学报，16(5)，479(2002))
13 WANG Xin,YIN Yansheng,LI Zhenjing,YANG Jingqi, ZHOU Yu,Preparation of ZrO_2(n)-Al_2O_3 ceramics nanocomposite by mixing sol with aqueous suspensions, Journal of Chemical Industry and Engineering(China), 50(3),362(1999) (王昕，尹衍升，李镇江，杨静漪，周玉，溶胶-悬浮液混合制备ZrO_2(n)-Al_2O_3纳米复合陶瓷，化工学报，50(3)，362(1999))
14 T.Fett,D.Munz,J.Seidel,M.Stech,J.R(?)del,Correlation between long and short crack R-curve in alumina using the crack opening displacement and fracture mechanical weight function approach,J.Am.Ceram.Soc.,79, 1189(1996)
15 C.J.Gilbert,J.J.Cao,L.C.De Jonghe,R.O.Ritchie,Crack- growth resistance-cuvre behavior in silicon carbide:small versus long cracks,J.Am.Ceram.Soc.,80,2253(1997)
16 T.Fett,Evaluation of the bridging relation from crack- opening displacement measurements by use of the weight function,J.Am.Ceram.Soc.,78,945(1995)
17 M.Zenotchkine,R.Shuba,J.S.Kim,I.W.Chen,R-curve be- havior of in situ toughenedα-sialon ceramics,J.Am.Ce- ram.Soc.,84,884(2001)
18 Y.L.Wang,U.Anandakumar,R.N.Singh,Effect of fiber bridging stress on the fracture resistance of silicon-carbide- fiber/zircon composites,J.Am.Ceram.Soc.,83, 1207(2000)
19 M.Sakai,H.Kurita,Size-effect on the fracture toughness and the R-Curve of carbon materials.J.Am.Ceram.Soc., 79,3177(1996)
20 P.F.Becher,C.W.Hsueh,K.B.Alexander,E.Y.Sun,Influ- ence of reinforcement content and diameter on the R-curve response in SiC-whisker-reinforce alumina,J.Am.Ceram. Soc.,79,298(1996)
21 H.Tomaszewski,M.Boniecki,H.Wegiarz,Toughness-curve behavior of alumina-SiC and ZTA-SiC composites,J.Eur. Ceram.Soc.,20,1215(2000)
22 O.Raddatz,G.A.Schneider,N.Claussen,Modeling of R- curve behavior in ceramic/metal composites,Acta Mater., 46,6381(1998)
23 O.Raddatz,G.A.Schneider,W.Mackens,H.Vob, N.Claussen,Bridging stresses and R-curves in ce- ramics/metal composites.J.Eur.Ceram.Soc.,20, 2261(2000)
24 F.Meschke,O.Raddatz,A.Kolleck,G.A.Schneider,R- curve behavior and crack-closure stresses in barium ti- tanate and(Mg,Y)-PSZ ceramics,J.Am.Ceram.Soc., 83,353(2000)
25 C.W.Li,D.J.Lee,S.C.Lui,R-curve behavior and strength for in-situ reinforced silicon nitrides with different mi- crostrctures,J.Am.Ceram.Soc.,75,1777(1992)
26 WANG Xin,SHAN Yan,YU Xuegang,XU Jing,YIN Yansheng,ZHOU Yu,Formation and mechanism of intra- granular structure in zirconia-toughened alumina ceramics with nano-ZrO_2 and micro-Al_2O_3,Journal of the Chinese Ceramic Society,31(12),1145(2003) (王昕，单妍，于薛刚，徐静，尹衍升，周玉，纳米ZrO_2-微米Al_2O_3复合陶瓷中“内晶型”结构的形成机理，硅酸盐学报，31(12)，1145(2003))
27 SHAN Yan,WANG Xin,YU Xuegang,XU Jing,YIN Yansheng,CUI Xuemin,Study on grain growth model in Al_2O_3-ZrO_2 ceramic composites,Journal of the Chinese Ceramic Society,31(3),278(2003) (单妍，王昕，于薛刚，徐静，尹衍升，崔学民，Al_2O_3-ZrO_2陶瓷体系中晶粒生长模型的研究，硅酸盐学报，31(3)，278(2003)) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
