|
|
|
| 三维编织复合材料预制体孔隙的几何仿真 |
| 张美忠 李贺军 李克智 |
|
引用本文:
张美忠; 李贺军; 李克智 . 三维编织复合材料预制体孔隙的几何仿真[J]. 材料研究学报, 2007, 21(2): 161-165.
1 K.Z.Li, H.J.Li, J.Y.Jiang, X.H.Hou, Numerical simulation of isothermal chemical vapor infiltration process in fabrication carbon-carbon composites by finite element method, Science in China (Series E), 43(1), 77(2000)
2 H.J.Li, J.Y.Jiang, K.Z.Li, Optimizing parameters of CVI process for manufacturing carbon-carbon composites by genetic algorithms, Materials Letter, 57(16-17), 2366(2003)
3 ZHAO Jianguo, LI Kezhi, LI Hejun, Effect of fiber volume fraction and thermal treatment on the properties of C/C composites, Chinese Journal of Materials Research, 19(3), 293(2005) (赵建国,李克智,李贺军,纤维含量与热处理对炭／炭复合材料性能的影响,材料研究学报,19(3),293(2005))
4 B.Narayana, A.E.Edward, A reduced reaction of carbon CVD/CVI processes, Carbon, 40,675(2002)
5 R.P.Currier, Overlap model for chemical vapor infiltration of carbon in porous carbon substrates, Carbon, 29(3), 387 (1991)
6 T.L.Starr, Gas transport model for chemical vapor infiltration, J. Mater. Res., 10(9), 2360(1995)
7 N.H.Tai, T.W.Chou, Analytical modeling of chemical vapor infiltration in fabrication of ceramic composites, J. Am. Ceram. Res., 72(3), 414(1989)
8 F.Robitaile, A.C.Long, I.A.Jones, C.D.Rudd, Automatically generated geometric descriptions of textile and composite unit cells. Composites: Part A, 34, 303(2003)
9 T.S.Lundstrom, B.R.Gebart, Effect of perturbation of fibre architecture on permeability inside fibre tow J. Compos. Mater., 29(4), 424(1995)
10 JIANG Weiping, YANG Guang, Calculation model of 3D five direction tubular braid's yarn trajectory and fiber volume fraction, Acta Materiae Compositae Sinica, 21(6), 120(2004) (姜卫平,杨光,三维五向管状织物纱束轨迹及纤维体积分散的分析与研究,复合材料学报,21(6),120(2004)
11 Z.X.Tang, R.Postle, Mechanics of three-dimensional braided structures for composite materials-part I:fabric structures and fibre volume fraction, Composite Structures, 49, 451(2000)
12 Y.Q.Wang, X.K.Sun, Digital-element simulation of textile processes, Composites Science and Technology, 61, 311(2001)
13 W.Sun, F.Lin, X.Hu, Computer-aid design and modeling of composite unit cells, Composites Science and Technology, 61, 289(2001)
14 ZHANG Meizhong, LI Hejun, LI Kezhi, Simulation of preforms in 3-D braided carbon/carbon composites, Journal of Materials Science & Engineering, 22(5), 634(2004) (张美忠,李贺军,李克智,三维编织碳／碳复合材料顶制体结构模拟,材料科学与工程学报,22(5),634(2004))
15 CHEN Li, LI Jialu, LI Xueming, Analysis of the yarn movement in 3D braids, Acta Materiae Compositae sinica, 19(2), 71(2002) (陈利,李嘉禄,李学明,三维编织中纱线的运动规律分析,复合材料学报,19(2),71(2002))
16 L.Chen., X.M.Tao, C.L Choy, Mechanical analysis of 3-D braided composites by the finite multiphase element method, Composites Science and Technology, 59, 391(1999) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
