|
|
|
| 连续纤维增强NiAl基复合材料研究进展 |
| 郭建亭 谢亿 |
|
引用本文:
郭建亭; 谢亿 . 连续纤维增强NiAl基复合材料研究进展[J]. 材料研究学报, 2007, 21(2): 113-118.
1 GUO Jianting,Ordered Intermetallic Compound NiAl Alloy, (Beijing,Science Press,2003)p．601(郭建亭,有序金属间化合物镍铝合金,(北京,科学技术出版社,2003)p．601)
2 R.D.Noebe, R.R.Bowman, M.V.Nathal, Physics and mechanical properties of the B2 compound NiAl, Inter. Mater. Rev., 38(4), 193(1993)
3 WANG Rongguo, WU Weili, GU Wanli, A Panorama of Composites, (Harbin, Harbin Institute of Technology Press, 1999) p.59 (王荣国,武卫莉,谷万里,复合材料概论,(哈尔滨,哈尔滨工业大学出版社,1999)p．59)
4 J.H.Schneibel, E.P.George, C.G.McKamey, E.K.Ohriner, M.L.Santella, C.A.Carmichael, Fabrication and tensile properties of continuous-fiber reinforced Ni3Al-Al2O3 composites, J.Mater.Res., 6(8), 1673(1991)
5 ZHANG Yonggang, HAN Yafang, CHEN Guoliang, GUO Jianting, WAN Xiaojing, FENG Di, Structural Intermetallics, (Beijing, National Defence Industry Press, 2001) p.1027 (张永刚,韩雅芳,陈国良,郭建亭,万晓景,冯涤,金属间化合物结构材料,(北京,国防工业出版社,2001)p．1027)
6 David E. Hajas, Stepan Kyrsta, Jochen M. Schneider, Effect of a BN interlayer on the tensile strength of NiAl coated sapphire fibers, Scripta Mater., 55, 219(2006)
7 XING Zhanping, AN Geying, GUO Jianting, Development of nickel aluminide matrix composites, I Preparation methods, Journal of Materials Engineering, (1), 4(1994) (刑占平,安阁英,郭建亭,Ni-Al系金属间化合物基复合材料的研究进展Ⅰ制备方法,材料工程,(1),4(1994))
8 L.Wang, K.Xu, R.R.Bowman, R.J.Arsenault, Interfaces in continuous filament-reinforced Al2O3/NiAl composites, Metall. Trans., 26A, 897(1995)
9 S.L.Draper, I.E.Locci, Al2O3 fiber strength degradation in metal and intermetallic matrix composites, J.Mater.Res., 9(6), 1397(1994)
10 W.Hu, W.Wunderlich, G.Gottstein, Interfacial chemical stability during diffusion bonding of Al2O3-fibers with Ni3Al- and NiAl-matrices, Acta Mater., 44(6), 2383(1996)
11 WANG Yumin, Processing interface reaction and tensile strength of continuous SiC(f)/Ti-6Al-4V composite produced by magnetron sputtering, Ph.D Dissertation, Institute of Metal Research Chinese Academy of Sciences(2005) (王玉敏,连续SiCfTi6Al4V复合材料的制备界面反应及拉伸性能研究,博士论文,中国科学院金属研究所(2005))
12 S.Nourbakhsh, F.L.Liang, H.Margolin, An apparatus for pressure casting of fiber-reinforced high-temperature metal-matrix composites, J. Phys. E:Sci. Istrum., 21, 898(1988)
13 S.Nourbakhsh, O.Sahin, W.H.Rhee, H.Margolin, Pressure casting of a zirconia-toughened alumina fiber-reinforced NiAl composite, Metall. Trans., 22A, 3059(1991)
14 S.N.Tewari, R.Asthana, R.D.Noebe, Interfacial shear strength of cast and directionally solidified NiAl-sapphire fiber composites, Metall. Trans., 24A, 2119(1993)
15 LI Kun, SHI Nanlin, SUN Chao, Review on interface of carbon fiber reinforce magnesium matrix composites, Materials Review, 19(5), 425(2005) (李坤,石南林,孙超,碳纤维增强镁基复合材料界面研究进展,材料导报,19(5),425(2005))
16 LU Lingchao, SHEN Yufang, CHENG Jun, LIU Futain, CHENG Xin, GUO Jianting, Study on the rheological behavior of alumina slurries, Journal of Ceramics, 24(3), 144(2003) (芦令超,申玉芳,常钧,刘福田,程新,郭建亭,Al2O3／NiAl复相陶瓷料浆流变性的研究,陶瓷学报,24(3),144(2003))
17 LU Lingchao, SHEN Yufang, CHENG Jun, LIU Futain, CHENG Xin, GUO Jianting, Study on the rheological behavior of the slurries of Al2O3/NiAl composite ceramics, Bulletin of the Chinese Ceramic Society, (4), 36(2003) (芦令超,申玉芳,常钧,刘福田,程新,郭建亭,氧化铝陶瓷料浆流变性的研究,硅酸盐通报,(4),36(2003))
18 M.Nathan, J.S.Ahearn, Nanometer-scale chemical compatibility between Nickel aluminide and Al2O3 or ZrO2 films, J. Mater. Sci. Lett., 13, 1215(1994)
19 K.Y.Wen, K.Reichert, W.Hu, M.Frommert, G.Gottstein, Interfacial thermal stability in BN-coated continuous Al2O3 fiber reinforced NiAl composites, in Materials for Advanced Power Engineering 2002, Edited by Lecomte-Beckers J., Carton M., Schubert F., Ennis P.J. (Julich, Forschungszentrum Julich Gmbh, 2002) p.673
20 K.Y.Wen, W.P.Hu, K.Reichert, G.Gottstein, Interfacial microstructure and reaction of BN-coated single crystal Al2O3 fiber reinforced NiAl matrix composites, J. Mater.Sci., 37, 1253(2002)
21 GUO Jianting, XING Zhanping,AN Geying, Development of nickel aluminide matrix composites,ⅡInterface and mechanical properties, Journal of Materials Engineering, (2), 8(1994) (郭建亭,刑占平,安阁英,Ni-Al系金属间化合物基复合材料的研究进展Ⅱ界面及力学性能,材料工程,(2),8(1994))
22 W.M.Mathews, C.S.Menon, K.P.Jayachandran, Thirdorder elastic constants and pressure derivatives of the second-order elastic constants of hexagonal boron nitride, J. Mater. Sci., 37, 5237(2002)
23 K.Reichert, K.Wen, R.Cremer, W.Hu, D.Neuschutz, G.Gottstein, Influence of BN fiber coatings on the interfacial structure of sapphire fiber reinforced NiAl composites, Appl. Surf. Sci., 179, 505(2001)
24 R.J.Kerans, R.S.Hay, T.A.Parthasarathy, M.C.Cinibulk, Interface design for oxidation-resistant ceramic composites, J. Am. Ceram. Soc, 85, 2599(2002)
25 K.Reichert, C.Martinez, R.Cremer, D.Neuschutz, Highrate sputter deposition of NiAl on sapphire fibers, in Materials for Advanced Power Engineering 2002, Edited by Lecomte-Beckers J., Carton M., Schubert F., Ennis P.J. (Julich, Forschungszentrum Julich Gmbh, 2002) p.663
26 Theodore T.Borek, Xiaomei Qiu, Leann M.Rayfuse, Abhaya K.Datye, Robert T.Paine, Boron nitride coating on oxide substrates: Role of surface modification, J. Am. Ceram. Soc, 74(10), 2587(1991)
27 CHEN Minghai, LIU Ning, XU Yudong, Development of research on the wettability of metal on ceramics, Cemented Carbide, 19(4), 199(2002) (陈名海,刘宁,许育东,金属／陶瓷润湿性的研究现状,硬质合金,19(4),199(2002))
28 K.Park, T.Vasilos, Microstructure and mechanical properties of silicon carbide fiber-reinforced aluminium nitride composite, J. Mater.Sci., 31, 5463(1996)
29 K.Park, T.Vasilos, Microstructure and thermal shock resistance of Al2O3 fiber/ZrO2 and SiC fiber/ZrO2 composites fabricated by hot pressing, J. Mater.Sci., 34, 2837(1999)
30 D.P.Miller, J.J.Lannutti, R.D.Noebe, Fabrication and properties of functionally graded NiAl/Al2O3 composites, J. Mater. Res., 8(8), 2004(1993)
31 R.R.Bowman, in Intermetallic Matrix CompositesⅡ, edited by D.B.Miracle, D.L.Anton, J.A.Graves (Mater. Res. Soc. Symp. Proc.273, Pittsburgh, PA, 1992)
32 R.R.Bowmann, A.K.Misra, S.M.Arnold, Processing and mechanical-properties of Al2O3 fiber-reinforced NiAl composites, Metall. and Mater. Trans., 26A, 615(1995)
33 S.L.Draper,I.E.Locci,and J.I.Eldridge, in HITEMP Review 1992, NASA CP-10104 (Lewis Research Center, Cleveland, OH, 1992) pp.16-1
34 YAO Jiangwei, YU Weidong, Study on tensile strength and its variation of carbon fibers, Materials Review, 19(7), 108(2005)) (姚江薇,于伟东,碳纤维的强度及离散的讨论,材料导报, 19(7),108(2005))
35 Saphikon data sheet for single sapphire fibers, c-axis orientation
36 E.R.Trumbauer, J.R.Hllmann, D.A.Koss, Niobium coating effects on the tensile strength of sapphire fibers, Composites, 25(7),625(1994)
37 J.B.Davis, J.Yang, A.G.Evans, Effects of composite processing on the strength of sapphire fiber-reinforced composites, Acta Metall. Mater., 43(1), 259(1995)
38 S.L.Draper, B.JM.Aikin, J.I.Eldridge, Tensile behavior of Al2O3/FeAl+B and Al2O3/FeCrAlY composites, Metall. Mater. Trans. A, 26A, 2719(1995)
39 S.L.Draper, B.JM.Aikin, Effect of composite fabrication on the strength of single crystal Al2O3 fibers in two Fe-base alloy composites, Mater. Sci. Eng., A286, 18(1999)
40 S.N.Tewari, R.Asthana, R.Tiwari, R.R.Bowmann, J.Smith, Influence of interfacial reactions on the fiber-matrix interfacial shear-strength in sapphire fiberreinforced NiAl(YB) composites, Metall. Mater. Trans. A, 26A, 477(1995)
41 W.Hu, T.Weirich, B.Hallstedt, H.Chen, Y.Zhong, G.Gottstein, Interface structure, chemistry and properties of NiAl composites fabricated from matrix-coated singlecrystalline Al2O3 fibers (sapphire) with and without an BN interlayer, Acta Mater., 54(3), 2473(2006) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
