Please wait a minute...
材料研究学报  2007, Vol. 21 Issue (1): 10-14    
  论文 本期目录 | 过刊浏览 |
热解炭结构对C/C复合材料烧蚀性能的影响
尹健  张红波  熊翔  黄伯云
引用本文:

尹健; 张红波; 熊翔; 黄伯云 . 热解炭结构对C/C复合材料烧蚀性能的影响[J]. 材料研究学报, 2007, 21(1): 10-14.

全文: PDF(711 KB)  
摘要: 采用电弧驻点烧蚀试验方法测试了具有典型光滑层和粗糙层热解炭结构的两种C/C复合材料的烧蚀率,研究了热解炭结构对C/C复合材料烧蚀性能的影响.结果表明:热解炭结构对C/C复合材料烧蚀性能有较大的影响.具有粗糙层结构的C/C复合材料石墨化度高,不同炭结构之间结合好,线烧蚀率和质量烧蚀率较小,烧蚀性能较好;具有光滑层结构的C/C复合材料石墨化度低,烧蚀性能较差.
Key words
收稿日期: 1900-01-01     
1 GU Zhengbin,LI Hejun,LI Kezhi,LI Aijun,Mamdani fuzzy system for isothermal CVI process of C/C com- posites,Chinese Journal of Material Research,17(4), 376(2003) (顾正彬,李贺军,李克智,李爱军,C/C复合材料等温CVI工艺Mamdani模糊系统建模,材料研究学报,17(4),376(2003))
2 Donghwan Cho,ByungⅡYoon,Microstrctural interpre- tation of the effect of various matrices on the ablation properties of carbon-fiber-reinforced composites,Com- posites Science and Technology,61,271(2001)
3 LIU Jianjun,SU Junming,CHEN Changle,Study on fac- tors affecting ablative performance of C/C composites, Carbon,(2),15(2003) (刘建军,苏君明,陈长乐,炭/炭复合材料烧蚀性能影响因素分析,炭素,(2),15(2003))
4 S.D.Williams,D.M.Curry,D.C.Chao,Ablation analysis of the Shuttle orbiter oxidation rotected reinforced carbon- carbon,in:6th AIAA/ASME Jiont Thermophysics and Heat Transfer Conference,Colorado Springs CO,1994
5 RAN Hongxing,CUI Hong,HAO Zhibiao,LI Ruizhen, ZHOU Shaojian,ZHANG Yi,SU Junming,Influence of carbon-matrix structure on antiablative performances of C/C composites,Carbon,(4),20(2002) (冉宏星,崔红,郝志彪,李瑞珍,周绍建,张?t,苏君明,炭基体结构状态对C/C复合材料抗烧蚀性能的影响,炭素,(4), 20(2002))
6 T.F.Zien,Thermal effects of particles on hypersonic abla- tion,in:35th AIAA thermophysics conference,Anaheim, CA,2001
7 YU Shu,LI Xibin,LIU Genshan,XIONG Xiang,HUANG Boyun,Influence of microstructure of pyrolytic carbon on friction and wear properties of carbon/carbon composites, Journal of Central South University (Natural Science), 33(6),613(2002) (于澍,李溪滨,刘根山,熊翔,黄伯云,热解炭结构对炭/炭复合材料摩擦磨损性能的影响,中南大学学报(自然科学版),33(6), 613(2002))
8 Xiong Xiang,Huang Baiyun,Li Jianghong,Xu Huijuan, Friction behaviors of carbon/carbon composites with dif- ferent pyrolytic carbon textures,Carbon,44,463(2006)
9 L.S.Donal,Unique applications of carbon/carbon compos- ite materials,SAMPE Journal,35(3),27(1999)
10 M.L.Lieberman,H.O.Pierson,Effect of gas phase condi- tions on resultant matrix pyrocabons in carbon/carbon composites,Carbon,12,233(1974)
11 Yin Jian,Xiong Xiang,Zhang Hongbo,Huang Baiyun, Microstrcture and ablation performance of dual-matrix carbon/carbon composites,Carbon,44,1690(2006)
12 CHEN Tengfei,GONG Weiping,LIU Gengshan,HUANG Yudong,WANG Chao,Influence of carbon matrix type and microstructure on fibre/matrix interfacial strength of C/C composites,Mining and Metallurgical Engineering, 24(1),77(2004) (陈腾飞,龚伟平,刘根山,黄玉东,王超,基体炭结构对炭/炭复合材料的界面结合强度的影响,矿冶工程,24(1),77(2004))
13 ZHANG Fuqin,HUANG Boyun,HUANG Qizhong, CHEN Tengfei,GONG Qianming,XIONG Xiang,Analy- sis of fracture morphologies of pyrocarbous and their inter- face in C/C composites by SEM,Mining and Metallurgical Engineering,22(3),93(2002) (张福勤,黄伯云,黄启忠,陈腾飞,巩前明,熊翔,C/C复合材料断口热解炭及其界面形貌SEM分析,矿冶工程,22(3), 93(2002))
14 ZHANG Wei,ZHANG Boming,MENG Songhe,HAN Jiecai,Study of ablation behaviors of 3D fine weaved pierced carbon/carbon composites using plasma torch at high temperature,Material Engineering,5,23(2003) (张巍,张博明,孟松鹤,韩杰才,细编穿刺碳/碳复合材料等离子火炬高温烧蚀性能研究,材料工程,5,23(2003))_
No related articles found!