材料研究学报  1997, Vol. 11 Issue (2): 178-182

研究论文 本期目录 | 过刊浏览 |

锌合金的液态模锻强化

齐乐华;李贺军;罗守靖

西北工业大学;西北工业大学;哈尔滨工业大学

MICROANALYSIS ON THE STRENGTHENING MECHANISM OF ZINC BASE ALLOY PREPARED BY LIQUID METAL FORGING

QI Lehua; LI Hejun (Northwestern Polytechnical University)LUO Shouting (Harbin Institute of Technology)

齐乐华;李贺军;罗守靖. 锌合金的液态模锻强化[J]. 材料研究学报, 1997, 11(2): 178-182.
, , . MICROANALYSIS ON THE STRENGTHENING MECHANISM OF ZINC BASE ALLOY PREPARED BY LIQUID METAL FORGING[J]. Chin J Mater Res, 1997, 11(2): 178-182.

摘要 参考文献 相关文章 Metrics 全文: PDF(2049 KB)   摘要: 利用SEM,TEM,XRD及能谱分析研究了铸态和液态模锻ZA12,ZA27合金的显微组织,结果表明液态模锻不仅使晶粒细化,还具有固溶强化和弥散强化的强韧化效应经液态模锻后,富铝α相中Cu增多,断口形貌转变为韧性断口 关键词 ： 液态模锻,  锌合金,  强韧化机理     Abstract：The microstructure and phase constituents of ZA12 and ZA27 alloy prepared by casting and liquid metal forging process have been comparatively researched by means of SEM, TEM, XRD and energy spectrum analyses. The results show that the microstructure has b Key words： liquid metal forging zinc base alloy strengthening mechanism 收稿日期: 1997-04-25      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 齐乐华 李贺军 罗守靖 44.8K 链接本文: https://www.cjmr.org/CN/      或      https://www.cjmr.org/CN/Y1997/V11/I2/178 1.E.Gervais, H.Levert, M.Bess, AFS Trans, 88, 183(1980) 2.周大隽,宋玉泉.锻压技术.(5),18(1993) 3 罗大金,黄利文,孙乐民 锻压技术(2),16(1992) 4.L.H.Qi, H.J.Li, W.C.Huo, In Adr. Tech. of Plasticity, edited by Z.R.Wang, Y.X.He(Int. Academic Publishers,Beijing, 1993) p.1222 5.齐乐华,李贺军,任学平,罗大金.热加工工艺(1),21(1995) [1] 毛丽贺 王玉林 万怡灶 何芳 黄远. 钛离子注入镁钙锌合金在SBF中的耐腐蚀性[J]. 材料研究学报, 2010, 24(4): 383-388. Viewed Full text Abstract Cited   Shared      Discussed