材料研究学报  1996, Vol. 10 Issue (5): 467-471

研究论文 本期目录 | 过刊浏览 |

薄膜及镀层织构定量分析

王沿东;刘沿东;徐家桢

东北大学

A METHOD FOR QUANTITATIVE TEXTURE ANALYSIS OF THIN-FILM AND COATING MATERIALS

WANG Yandong;LIU Yandong;XU Jiazhen(Northeastern University)

王沿东;刘沿东;徐家桢. 薄膜及镀层织构定量分析[J]. 材料研究学报, 1996, 10(5): 467-471.
, , . A METHOD FOR QUANTITATIVE TEXTURE ANALYSIS OF THIN-FILM AND COATING MATERIALS[J]. Chin J Mater Res, 1996, 10(5): 467-471.

摘要 参考文献 相关文章 Metrics 全文: PDF(435 KB)   摘要: 针对薄膜及镀层织构分析的特殊困难(衍射峰特宽、强度测量偶然误差严重、散焦补正困难等),基于熵最大与极密度差最小二乘优化应同步进行的原则,提出了织构分析中熵最大处理模式的新的约束条件,修正了以往约束条件与取向非负性之间的不自洽性[1],从而克服了薄膜织构定量分析的困难.模拟研究表明:新方法可以自动补偿测量偶然误差及散焦误差、应用实例指出,此法可成功进行实际镀层材料的织构定量分析。 关键词 ： 薄膜材料,  织构定量分析,  最大熵原则     Abstract：The texture analysis in thin films and coating materials has suffered some difficulty due to the broadenling diffraction peaks, strong defocusing effect and severe stochastic errors of measured pole figures.Based on the prirciple of maximum entropy and th Key words： thin-film and coating material;quantitative texture analysis;the principle of maximum Entropy 收稿日期: 1996-10-25      基金资助:国家教委回国留学基金;;冶金工业部资助 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 王沿东 刘沿东 徐家桢 44.8K 链接本文: https://www.cjmr.org/CN/      或      https://www.cjmr.org/CN/Y1996/V10/I5/467 1王沿东,徐家桢,金属学报,1995,31:B5502HeizmannJJ,LaruelleC,JApplCryst,1986,19:4673ChateignerD,GermiP,Pernet,MaterialsScienceForum,1994,157~162:13794ChateignerDetal．JApplCryst,1992,25:7665BermigG,TobischJ,HelmingK．MaterialsScienceForum,1994,157~162:976WangF,XuJZ,LiangZD．Warrendale,8thICOTOM,1987:1107LiangZD,XuJZ,WangF．TextruesandMicrostructures,1989,10:2178WenkJR,BurgeHJetal．TheEighthInternationalConferenceonTexturesofMaterials(ICOTOM8),1987:179王沿东,刘沿东,徐家桢．待发表 [1] 徐明霞; 郑嘹赢; 刘丽月; 樊丽莹; 徐廷献 . 新型氧敏薄膜材料[J]. 材料研究学报, 2001, 15(1): 17-22. Viewed Full text Abstract Cited   Shared      Discussed