材料研究学报  1996, Vol. 10 Issue (4): 397-400

研究论文 本期目录 | 过刊浏览 |

铝合金电磁铸造工艺参数的研究

金俊泽;张兴国;曹志强;朱晓鹰

大连理工大学;大连理工大学铸造工程研究中心

STUDY ON TECHNOLOGICAL PARAMETERS OF EMC PROCESSING IN Al ALLOYS

JIN Junze; ZHANG Xingguo; CAO Zhiqiang ;ZHU Xiaoying (Dalian University of Technology)(Correspondent:Director Professor;The Engineering Research Center of Foundry;Dalian University of Tech nology;Dalian 116023)

金俊泽;张兴国;曹志强;朱晓鹰. 铝合金电磁铸造工艺参数的研究[J]. 材料研究学报, 1996, 10(4): 397-400.
, , , . STUDY ON TECHNOLOGICAL PARAMETERS OF EMC PROCESSING IN Al ALLOYS[J]. Chin J Mater Res, 1996, 10(4): 397-400.

摘要 参考文献 相关文章 Metrics 全文: PDF(257 KB)   摘要: 通过近似计算和试验确定了工程规模的铝合金电磁铸造(EMC)基本工艺参数如感应器电流、电压、频率、功率消耗等与液柱高度及稳定性的关系.设计制造了EMC装置,成功地铸造了截面直径为0.18m,0.11×0.05m,0.52×0.13m的铝及铝合金圆锭和扁锭。 关键词 ： 电磁铸造,  感应器,  屏蔽罩,  液柱高度     Abstract：By an approximate calculation method, the electric current, voltage,impedance as well as power during EMC process were estimated. As a result, a generator type was chosen. The device of EMC,such as inductor, was designed and set up. The aluminum and alumi Key words： electromagnetic casting    inductor    screen    height of molten column 收稿日期: 1996-08-25      基金资助:中国有色金属工业总公司和辽宁省科委项目 服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 金俊泽 张兴国 曹志强 朱晓鹰 44.8K 链接本文: https://www.cjmr.org/CN/      或      https://www.cjmr.org/CN/Y1996/V10/I4/397 1LaversJDLEEEConfRecIEEE—IAS15thAnnuMeeting,NewzYork:IEEEInc,1980:9492LaversJDLEEEConfRecIEEE-IAS17thAnnuMeeting,NewYork;IEEEInc,1982:9543ShigeoASAI．ISIJInternational,1989、29(12):9814OshimaS．In:ShigeoASAI,OshimaSeds．ElectromagneticProcessingofMaterials,Tokyo,Osaka:ISIJ,1993:195潘天明．工频和中频感应炉,北京:冶金工业出版社,1983:2036朱晓鹰,金俊泽．轻金属,1980,(4):607张维平,金俊泽．大连理工大学学报,1991,31(4):419P [1] 曹志强; 张兴国; 贾非; 郝海; 金俊泽 . 电磁铸造铝合金锭的力学性能[J]. 材料研究学报, 2002, 16(6): 635-639. [2] 金俊泽; 孙义海; 李廷举 . 圆锭电磁铸造中电磁场及液柱形状的计算机模拟[J]. 材料研究学报, 2000, 14(3): 249-254. [3] 田正宏; 张兴国; 金俊泽 . 铝薄板热顶-电磁铸造成型工艺研究[J]. 材料研究学报, 1999, 13(5): 546-548. Viewed Full text Abstract Cited   Shared      Discussed