Please wait a minute...
Chin J Mater Res  1989, Vol. 3 Issue (1): 93-96    DOI:
Current Issue | Archive | Adv Search |
DEVELOPMENT OF SOFT,BAG—SHAPED TYPE Ⅱ PLASTIC SEPARATOR
GUO Wanlu WU Li'e (Changchun Institute of Applied Chemistry;Accdemia Sinica)
Cite this article: 

GUO Wanlu WU Li'e (Changchun Institute of Applied Chemistry;Accdemia Sinica). DEVELOPMENT OF SOFT,BAG—SHAPED TYPE Ⅱ PLASTIC SEPARATOR. Chin J Mater Res, 1989, 3(1): 93-96.

Download:  PDF(302KB) 
Export:  BibTeX | EndNote (RIS)      
Abstract  The separator is one of the important parts of lead-acidbattery.A soft,bag-shapea Type Ⅱ plastic separator which based on a inter-nally plasticized polymer,was developed.The physical and chemical propertiesof Type Ⅱ separator were systematically measured.
Key words:  Load acid battery      plastic separator     
Received:  25 February 1989     
Service
E-mail this article
Add to citation manager
E-mail Alert
RSS
Articles by authors

URL: 

https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1989/V3/I1/93

1 邱德瑜,高连华,郭万禄,尹承滨.第十六届全国化学与物理电源会议论文集,长沙,中国电子会化学与物理电源学会.1983:60
2 毛卓英.蓄电池,沈阳蓄电池研究所,1982;(4) 总65:18
3 Barak M.Electrochemical Power Sources Stevenage Peter Peregrinas,1980:251
No related articles found!
No Suggested Reading articles found!