Chin J Mater Res  1989, Vol. 3 Issue (5): 436-441    DOI:

Current Issue | Archive | Adv Search |

DOUBLE TORSION METHOD AND ITS USE FOR MECHANICAL PROPERTIES EVALUATION OF BRITTLE MATERIALS

WANG Xueeheng JIN Zhihao LI Guangxin WANG Xiaotian (Xi'an Jiaotong University)

WANG Xueeheng JIN Zhihao LI Guangxin WANG Xiaotian (Xi'an Jiaotong University). DOUBLE TORSION METHOD AND ITS USE FOR MECHANICAL PROPERTIES EVALUATION OF BRITTLE MATERIALS. Chin J Mater Res, 1989, 3(5): 436-441.

Abstract References Related Articles Recommended Metrics Download:  PDF(457KB)  Export:  BibTeX | EndNote (RIS)       Abstract  The double torsion method(DT)for mechanical properties eva-luation of brittle materials has been presented.It is shown that DT method hassuch advantages as wide material adaptability and extensive study contents sinceits stress intensity factor(K_1)at cra Key words:  double torsion      brittle material      crack length      stress intensity factor      subcritical crack growth      Received:  25 October 1989      Service E-mail this article Add to citation manager E-mail Alert RSS （） Articles by authors URL:  https://www.cjmr.org/EN/     OR     https://www.cjmr.org/EN/Y1989/V3/I5/436 1 徐祖耀,李鹏兴.材科科学导论,上海:上海科学技术出版社,1986:851 2 Davige R W et al.Mat Sci Eng,1970;6(5) :281 3 Freiman S M.J Mat Sci,1978;13(12) :2659 4 Lawn B R,Wieshaw T R.Fracture of Brittle Solids.London:Cambridge University Press,1975:109 5 Pratt P L.Fracture-1969． London:Chapman and Hall.Press.1969:483 6 Willams D P,Evans A G.J Testing and Evaluation,1973;1(4) :264 7 Evans A G et al.Met Trans,1975;6A(4) :707 8 Bradt R C et al.Fracture Mechanics of Ceramics V.2． New York-London:Plenum Press,1974:613 9 官田畀,1985;20(1) :3 10 陆毅中.工程断裂力学.西安:西安交通大学出版社,1987:133 11 Bradt R C et al.Fracture Mechanics of Ceramics Vol.1． New York-London:Plenum Press,1974:1 [1] Sunyiming LUO,Jun ZHANG,Jiahe WANG. Determination of Tension Softening Relationship of Concrete from Crack Length Measurement[J]. 材料研究学报, 2014, 28(11): 801-808. [2] SHAN Zhaohui; WANG Zhongguang ;ZHANG Yun; HU Zhuangqi (National Key Laboratory of Fatigue and Fracture for Materials;Institute of Metal Research; Chinese Academy of Sciences). SHORT NOTCH CRACK BEHAVIOR OF Al-Li ALLOYS[J]. 材料研究学报, 1994, 8(6): 524-526. [3] BAO Yiwang; JIN Zhongzhe; SUN Li (China Building Materials Academy). QUANTIZATION OF BRITTLENESS AND IMPACT MODULUS[J]. 材料研究学报, 1994, 8(5): 419-423. [4] SUI Guoxin XU Yongbo ZHOU Jing HA Kuanfu WANG Zhongguang (Institute of Metal Research;Academia Sinica;Jilin University). IN-SITU OBSERVATIONS ON DISLOCATION BEHAV IOR AND THE EFFECT OF HYDROGEN NEAR THE CRACK-TIP IN Fe-3%Si SINGLE CRYSTAL BY TEM[J]. 材料研究学报, 1991, 5(4): 308-314. [5] WANG Linsheng JIN Zongzhe MA Juanrong (Beijing Institute of Light Industry)(China Buliding Material Academy). THE SERVICE LIFE OF BRITTLE MATERIALS[J]. 材料研究学报, 1991, 5(3): 252-254. [6] FU Ran;LONG Qiyi;ZHANG Tianyi;LONG Qiwei(Institute of Metal Research;Academia Sinica). CLEAVAGE CRACK TIP DEFORMATION IN ZINC SINGLE CRYSTAL[J]. 材料研究学报, 1990, 4(1): 14-19. No Suggested Reading articles found! Viewed Full text Abstract Cited   Shared      Discussed