MECHANISM FOR DYNAMIC RECRYSTALLIZATION BY SUBGRAIN TILT IN 8090 Al-Li ALLOY

Chin J Mater Res

1992, Vol. 6

Issue (6): 472-475 DOI:

Current Issue | Archive | Adv Search

MECHANISM FOR DYNAMIC RECRYSTALLIZATION BY SUBGRAIN TILT IN 8090 Al-Li ALLOY

LIU Zhiyi;CUI Jianzhong;BAI Guangrun(Northeast University of Technology)

Cite this article:

LIU Zhiyi;CUI Jianzhong;BAI Guangrun(Northeast University of Technology). MECHANISM FOR DYNAMIC RECRYSTALLIZATION BY SUBGRAIN TILT IN 8090 Al-Li ALLOY. Chin J Mater Res, 1992, 6(6): 472-475.

Download:

PDF(719KB)
Export: BibTeX | EndNote (RIS)

Abstract A dynamic recrystallization nucleated by subgrain tilt was discovered by investi-gating hot deformation of 8090Al-Li alloy.The nucleation by subgrain tilt and the effect ofstrains on the nucleation were analyzed.It is pointed out by investigations that th

Key words: Al-Li alloy subgrain tilt recrystallization mechanism

Received: 25 December 1992

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1992/V6/I6/472

1 Nes E.J Mater Sci Lett,1978;13:2052
2 Nes E.Metall Sci,1979;13:211
3 Nes E.In:Baudelet B,Suery M eds.Superplasticite/Superplasticity,Editions du CNRS,Paris 1985:7． 1
4 Liu Qing,Meng Qinzhong.Micro and Microscopica Acta 1989;20(4) :351
5 Hirth J P,Lothe J.Theory of Dislocation,2nd Ed.New York:Wiley-Interscience,1982:733
6 Hirth J P,Lothe J Theory of Dislocation,2nd Ed.New York:Wiley-Interscience,1982:80
7 Hirth J P,Lothe J.Theory of Dislocation,2nd Ed.New York:Wileg-Interscience,1982:741
8 Watson T J.Bennetch J I.In:Heikkenen HC,McNelley T R eds.Superplasticity in Aerospace,Warrendale Pa:Metall Soc,1988:261
9 Gudmundsson H,Brools D A.Acta Metall,1991;39(1) :49

[1]	SHAN Zhaohui; WANG Zhongguang ;ZHANG Yun; HU Zhuangqi (National Key Laboratory of Fatigue and Fracture for Materials;Institute of Metal Research; Chinese Academy of Sciences). SHORT NOTCH CRACK BEHAVIOR OF Al-Li ALLOYS[J]. 材料研究学报, 1994, 8(6): 524-526.
[2]	LIU Zhengang;HUANG Xiaoxu;LI Xuhong;LIU Qing;YAO Mei(Harbin Institute of Technology). SUPERPLASTIC DEFORMATION PROCESS OF COLD-ROLLED Al-Li-Cu-Mg-Zr ALLOY[J]. 材料研究学报, 1993, 7(6): 485-490.
[3]	GUI Quanhong MA Luming JIANG Xiaojun LIANG Guojun LI Yiyi (Institute of Metal Research;Chinese Academy of Sciences). EFFECT OF Y ON TENSILE PROPERTIES AND FRACTURE BEHAVIOR OF 8090 Al-Li ALLOY[J]. 材料研究学报, 1993, 7(5): 396-400.
[4]	LIU Yulin HU Zhuangqi ZHANG Yun ZHAO Hongen SHI Changxu (Institute of Metal Research;Chinese Academy of Sciences). THE SOLIDIFICATION MECHANISM OF 8090 Al-Li ALLOY[J]. 材料研究学报, 1993, 7(5): 391-395.
[5]	WU Yue WANG Guozhi SONG Zhijian ZHANG Yongchang (Institute of Metal Research;Chinese Academy of Sciences). EFFECT OF AGING ON THE STRUCTURES AND PROPERTIES OF RAPIDLY SOLIDIFIED Al-Li-Cu AND Al-Li-Cu-Zr ALLOYS[J]. 材料研究学报, 1993, 7(4): 298-303.
[6]	DING Hua;ZHANG Caipei;CUI Jianzhong(Northeast University of Technology). RECRYSTALLIZATION OF COLD-ROLLED Al-Li ALLOY[J]. 材料研究学报, 1992, 6(5): 391-394.
[7]	LIU Yulin ZHANG Yun HU Zhuangqi SHI Changxu (Institute of Metal Research;Academia Sinica). THE INFLUENCE OF THERMOMECHANICAL TREATMENT ON THE RECRYSTALLIZATION BEHAVIOR OF Al-Li-Cu-Mg-Zr ALLOYS[J]. 材料研究学报, 1991, 5(5): 369-374.
[8]	ZHANG Dan MAN Yongfa LIU Jinzhu (Institute of Metal Research;Academia Sinica). THE WEAR RESISTANCE OF THE LASER RAPIDLY SOLIDIFIED Al-Li ALLOY[J]. 材料研究学报, 1991, 5(5): 375-380.
[9]	YAO Daping ZHANG Yun HU Zhuangqi LI Yiyi (Institute of Metal Research;Academia Sinica). GRAIN BOUNDARY FRACTURE IN Al-Li ALLOY[J]. 材料研究学报, 1991, 5(2): 143-146.
[10]	ZHENG Ziqiao ZHANG Weibin (Central-South University of Technology). EFFECT OF ALLOYING ELEMENTS ON THE PRECIPITATION AND TENSILE PROPERTIES OF Al-Li ALLOYS[J]. 材料研究学报, 1991, 5(1): 35-39.
[11]	YAO Daping;HU Zhuangqi;LI Yiyi;ZHANG Yun;SHI Changxu(Institute of Metal Research;Academia Sinica). RELATIONSHIP BETWEEN MICROSTRUCTURES AND PRORERTIES OF Al-Li-Mg-Zr ALLOYS[J]. 材料研究学报, 1990, 4(5): 409-414.
[12]	YAO Daping;HU Zhuangqi;LI Yiyi;ZHANG Yun;SHI Changxu(C.H.Shih)(Institute of Metal Research;Academia Sinica). MECHANICAL PROPERTIES OF BINARY Al-Li ALLOYS AT CRYOGENIC TEMPERATURE[J]. 材料研究学报, 1990, 4(4): 309-313.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed