THE PRODUCTION OF FOAM ALUMINIUM ALLOY BY LOW-PRESSURE INFILTRATION METHOD

Chin J Mater Res

1993, Vol. 7

Issue (6): 473-478 DOI:

Current Issue | Archive | Adv Search

THE PRODUCTION OF FOAM ALUMINIUM ALLOY BY LOW-PRESSURE INFILTRATION METHOD

ZHANG Yong;SHU Guangji;HE Deping(Southeast University)

Cite this article:

ZHANG Yong;SHU Guangji;HE Deping(Southeast University). THE PRODUCTION OF FOAM ALUMINIUM ALLOY BY LOW-PRESSURE INFILTRATION METHOD. Chin J Mater Res, 1993, 7(6): 473-478.

Download:

PDF(422KB)
Export: BibTeX | EndNote (RIS)

Abstract The technical parameters influencing the infiltrating height of the molten metalin the process of producing aluminium alloy foam by low-pressure infiltration method were in-vestigated.Experiments indicate that the height increases with the preheating temp

Key words: aluminium alloy foam low-pressure casting infiltration

Received: 25 December 1993

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1993/V7/I6/473

1 Sosnik A.US Patent 2434775,1948
2 Davies G J 等著,朱依昆等译.上海有色金属,1985;2(6) :36
3 长田纯夫,坂本满,上野英俊.金属,1988;(3) :32
4 闻德荪等.工程流体力学.北京:高等教育出版社,1990:264+

[1]	MIAO Qi, ZUO Xiaoqing, ZHOU Yun, WANG Yingwu, GUO Lu, WANG Tan, HUANG Bei. Pore Structure, Mechanical and Sound Absorption Performance for Composite Foam of 304 Stainless Steel Fiber/ZL104 Aluminum Alloy[J]. 材料研究学报, 2023, 37(3): 175-183.
[2]	Yinsheng HU,Huan YU,Zhifeng XU,Changchun CAI,Mingming NIE. Effect of Fiber Preheating Temperature on Mechanical Properties of Continuous Al₂O_3f/Al Composites[J]. 材料研究学报, 2019, 33(5): 361-370.
[3]	Wanli YANG, Lina DAI, Zhongqi SHI, Zhichao XIAO, Xuhui ZHANG. Effect of Infiltration- and Pyrolyzation-Treatment on Mechanical Properties of Pressureless Sintered SiC/h-BN Ceramics[J]. 材料研究学报, 2017, 31(8): 635-640.
[4]	Jianhong LAI, Yang ZHOU, Yong ZHENG, Jiaqi WANG, Zhenying HUANG, Shibo LI, Hongxiang ZHAI. Preparation and Property of Bi-continuous Phase TiC/Fe Composite[J]. 材料研究学报, 2017, 31(10): 743-750.
[5]	Jinshan HE,Hailong ZHANG,Yang ZHANG,Jianwei LI,Xitao WANG. Thermal Conductivity of Cu/Diamond Composites Produced by High Pressure Liquid Infiltration Method[J]. 材料研究学报, 2014, 28(5): 321-324.
[6]	CHEN Zhaoke XIONG Xiang LI Guodong. Oxidation Behavior of C Fiber Reinforced TaC Matrix Composites[J]. 材料研究学报, 2010, 24(2): 201-207.
[7]	LIU Jian QI Lehua ZHOU Jiming SU Lizheng. Prediction of surface damage for Al₂O_3sf/2A12 composites by liquid infiltration-extrusion process[J]. 材料研究学报, 2009, 23(6): 616-621.
[8]	WANG Qingxiang FAN Zhikang YANG Yi. Effect of preparation methods on microstructure and properties of W--10%Ti alloy[J]. 材料研究学报, 2009, 23(3): 293-299.
[9]	. Preparation for 2D–C/C composites with pure RL textures and its characteristic[J]. 材料研究学报, 2009, 23(2): 138-142.
[10]	;. Fabrication and room--temperature compressive behavior of TiCp/Mg matrix composites by $in$ $situ$ reactive infiltration technique[J]. 材料研究学报, 2004, 18(2): 193-198.
[11]	HE Deping; WEN Desun; ZHANG Yong; SHU Guangji (Southeast University). THE INFILTRATION PROCESS OF MOLTEN AI INTO POROUS MEDIA[J]. 材料研究学报, 1997, 11(2): 113-119.
[12]	WANG Haowei; WU Renjie; ZHANG Guoding(Shanghai Jiao Tong University). INFLUENCE OF THE ORIGINAL STATE OF FIBERS ON THE MICRO-MORPHOLOGY OF METAL MATRIX COMPOSITE[J]. 材料研究学报, 1996, 10(1): 105-108.
[13]	WANG Haowei;SHANG Baolu;ZHENG Laisu(Northwestern Polytechnical University). THE INTERFACE BEHAVIOR OF Be IN C/Mg COMPOSITES[J]. 材料研究学报, 1992, 6(5): 455-458.
[14]	ZHU Hexiang;LIU Shikai(Southwest Jiaotong University). SiC WHISKERS REINFORCED Zn-12Al ALLOY AND ITS PROPERTIES[J]. 材料研究学报, 1992, 6(1): 88-92.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed