HOT PRESS REACTION SINTERING AND MECHANICAL PROPERTIES OF BORON CARBIDE

Chin J Mater Res

1993, Vol. 7

Issue (6): 517-520 DOI:

Current Issue | Archive | Adv Search

HOT PRESS REACTION SINTERING AND MECHANICAL PROPERTIES OF BORON CARBIDE

TANG Guohong;CHEN Changqi(Beijing University of Aeronautics and Astronautics)

Cite this article:

TANG Guohong;CHEN Changqi(Beijing University of Aeronautics and Astronautics). HOT PRESS REACTION SINTERING AND MECHANICAL PROPERTIES OF BORON CARBIDE. Chin J Mater Res, 1993, 7(6): 517-520.

Download:

PDF(278KB)
Export: BibTeX | EndNote (RIS)

Abstract The poor sinterability of B_4C limits its widespread application because bothhigh temperature and high pressure are required for a complete densification.Morever,B_4C suf-fers from a low strength and fracture toughness,but possesses a high potential use i

Key words: boron carbide reaction sintering strengthening and tonghening

Received: 25 December 1993

	Service

	E-mail this article
	Add to citation manager
	E-mail Alert
	RSS
	（）
	Articles by authors

URL:

https://www.cjmr.org/EN/ OR https://www.cjmr.org/EN/Y1993/V7/I6/517

1 唐国宏,北京航空航天大学博士论文,1993
2 Dorner P D,Dissertation,University Stuttgart,1982
3 Selsing J,J Am Ceram Soc,1961;44(2) :419

[1]	WANG Huanping ZHANG Bin MA Hongping XU Shiqing LI Denghao ZHOU Guangmiao. Mechanism of Lowering the Sintering Temperature of Al₂O₃ Ceramic by the Addition of CuO–TiO₂ (II)[J]. 材料研究学报, 2010, 24(1): 37-43.
[2]	ZHANG Bin WANG Huanping MA Hongping XU Shiqing LI Denghao ZHOU Guangmiao. Mechanism of lowering the sintering temperature of Al₂O₃ ceramic by the addition of CuO–TiO₂(I)[J]. 材料研究学报, 2009, 23(5): 534-540.
[3]	CHENG Tianyi (Beijing Institute of Technology). A PRELIMINARY STUDY OF HOT PRESSURE REACTION SINTERED NiAl INTERMETALLICS[J]. 材料研究学报, 1994, 8(5): 442-444.

No Suggested Reading articles found!

Viewed

Full text

Abstract

Cited

Shared

Discussed