|
|
|
| MACHINE COMPLIANCE EFFECT OF THE NANOINDENTER AND ITS MODIFICATION ON THE HARDNESS AND ELASTIC MODULUS MEASUREMENT |
| HOU Genliang; LU Mingzhu;XU Kewei(State Key Laboratory for Mechanical Behavior of Materials;Xi'van Jiaolong University)(Correspondent:XU Kewei;Professor;School of Materials Science and Engineering;Xian Jiaotong University;Xi'an 710049) |
|
Cite this article:
HOU Genliang; LU Mingzhu;XU Kewei(State Key Laboratory for Mechanical Behavior of Materials;Xi'van Jiaolong University)(Correspondent:XU Kewei;Professor;School of Materials Science and Engineering;Xian Jiaotong University;Xi'an 710049). MACHINE COMPLIANCE EFFECT OF THE NANOINDENTER AND ITS MODIFICATION ON THE HARDNESS AND ELASTIC MODULUS MEASUREMENT. Chin J Mater Res, 1995, 9(6): 491-495.
|
|
|
Abstract The effeCt of machine compliance on the hardness and elastic modulus was studied using the YY-I indentation tester.It is evident that the machine compliance mainly influences the slope of the unloading curve,and must be subtracted in the test.This is par
|
|
Received: 25 December 1995
|
| 1RamahV,BerricheR．JMaterRes,1992;17(3):6272WuTW,MoshrefM,AlexopoulosPS．ThinSolidFilms,1990;187:2953VancoilleE,CelisJP,JRRoos,ThinSolidFilms,1993;224:1684NixWD．MetallurgicalTransactions,1989;20A(11):22175KingRB．IntJSolidsStructures,1987;23:16576HendrixBC,刘军海,何家文:第五届全国固体薄膜会议论文集．1994;2037OliverWCPharrCMJMaterRes,1992;7(6):15648侯根良．西安交通大学[硕士学位论文],19959HendrixBC,YuLG,HeJW:IntheProceedingsofInternatlonalSymposiumonFatigueandStrengthofSolias,July1994,Xi'an,China10蔡洵,张兮,周平南．理化检验-物理分册,1993;29(4):1911侯根良,刘军海,徐可为．金属学报,1995,31(5):A236 |
| No Suggested Reading articles found! |
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
