材料研究学报  2007, Vol. 21 Issue (2): 151-154

论文 本期目录 | 过刊浏览 |

ZL201合金的半固态成形组织和力学性能

王平　 尹翔　 崔建忠　 路贵民

王平; 尹翔; 崔建忠; 路贵民 . ZL201合金的半固态成形组织和力学性能[J]. 材料研究学报, 2007, 21(2): 151-154.

摘要 参考文献 相关文章 Metrics 全文: PDF(598 KB)   摘要: 制备ZL201合金半固态坯料、将其二次加热、触变模锻成形以及成形件热处理,研究了工艺条件对成形件的组织和力学性能的影响.结果表明:采用近液相线半连续铸造技术制备的ZL201合金半固态坯料微观组织为大量细小的等轴晶和少量短程枝晶;在适当的工艺条件(在640℃保温5 min,模具温度250～300℃,留模时间10～15 s)下可触变成形出表面光洁的ZL201合金成形件;经过T5处理后,ZL201合金的抗拉强度达到278 MPa,延伸率达到9%,大大高于压铸成形件的性能,其强化相为CuAl2和TiAl3.由于成形速度高,溶体高速充型,造成成形件气孔率高,使ZL201合金半固态压铸成形的组织致密度不如半固态模锻成形件,这是半固态压铸件强度低、模锻件强度高的主要原因. Key words： 收稿日期: 1900-01-01      服务 把本文推荐给朋友 加入引用管理器 E-mail Alert RSS 作者相关文章 王平 尹翔 崔建忠 路贵民 44.8K 链接本文: https://www.cjmr.org/CN/Y2007/V21/I2/151 1 M.C.Flemings, R.G.Piek, K.P.Young, The theology of a partially solid alloy, Metall. Trans., 17(3), 1925(1972) 2 M.C.Fleming, Behavior of metal alloys in the semi-solid state, Metall. Trans., 22B(6), 269(1991) 3 D.H.Kirkwood, P.Kapranos, Semi-solid processing of alloy, Metal and Materials, 11(2), 16(1988) 4 T.Z.Kattamis, T.J.Poccone, Rheology of semi-solid Al4.5%Cu-1.5%Mg alloy, Materials Science Engineering, 131A, 265(1991) 5 J.Y.Chen, Z.Fan, Modelling of rheological behaviour of semi-solid metal slurries, Material Science & Technology, 18(3), 237(2002) 6 M.Hiral, K.Takebayashi, Y.Yoshikawa, Apparent viscosity of Al-10%Cu semisolid alloy. ISIJ Int, 33, 405(1993) 7 H.V.Atkinson, Modelling the semisolid processing of metallic alloys. Progress in Materials Science, 50, 341(2005) 8 Cui Chenglin, Verification and numerical simulation for semi-solid modeling the thixoforming process. The Journal of University of Science and Technology Beijing, 22(3), 237(2001) (崔成林,半固态触变压射成形过程模拟及验证．北京科技大学学报,22(3),237(2001)) 9 ZHOU Zhihua, MAO Weimin, LIU Zheng, Rheological behavior of semi-solid AlSi4Mg2 aluminum alloy at steady state, Chinese Journal of Materials Research, 20(1), 5(2006) (周志华,毛卫民,刘正,半固态AlSi4Mg2铝合金的稳态流变性能,材料研究学报,20(1),5(2006)) 10 ZHOU Tianguo, WEN Jinglin, CHEN Yanbo, Microstructures and properties of 6201 alloy wires manufactured by continuous semisolid forming, Chinese Journal of Materials Research, 19(3), 331(2005) (周天国,温景林,陈彦博,连续半固态成形6201合金线材的组织和性能,材料研究学报,19(3),331(2005)) 11 LIU Zheng, MAO Weimin, ZHAO Zhenduo, Preparation of semi-solid slurry of aluminum alloys by a new technology, Chinese Journal of Materials Research, 20(2), 125(2006) (刘正,毛卫民,赵振铎,用新工艺制备半固态铝合金浆料,材料研究学报,20(2),125(2006)) 12 WANG Ping, SHI Lifeng, LU Guimin, CUI Jianzhong, Microstructure and properties of ZL201 alloy obtained by near-liquidus electromagnetic casting, Acta Metallurgica Sinica, 18(5), 653(2005) (王平,史立峰,路贵民,崔建忠,近液相线电磁铸造ZL201合金显微组织,金属学报英文版,18(5),653(2005)) 13 ZHAO Tao,KANG Hao, SHI Lifeng, WANG Ping, Microstructure and performance of semi-solid rheoformed alloy ZL201, Journal of Northeastern University, 27(2), 185(2006) (赵涛,康皓,史立峰,王平,ZL201合金半固态电磁流变成形组织与性能,东北大学学报(自然科学版),27(2),185(2006)) 14 WANG Ping, KANG Hao, SHI Lifeng, Any casting simulating and validating for the die casting of semi-solid ZL201 alloy, Rare Metal Materials and Engineering, 35(6), 880(2006) (王平,康皓,史立峰,ZL201合金半固态成形的模拟与验证,稀有金属材料与工程,35(6),880(2006)) 15 WANG Ping, LU Guimin, CUI Jianzhong, Heat stability of semi-solid A356 alloy during remelting process, Rare Metal Materials and Engineering, 34(2), 231(2005) (王平,路贵民,崔建忠,半固态．A356合金重熔加热过程中的热稳定性,稀有金属材料与工程,34(2),231(2005)) No related articles found! Viewed Full text Abstract Cited   Shared      Discussed