|
|
|
| Ti(C,N)/Ni扩散焊接界面的组织和性能 |
| 周世权 熊惟皓 |
|
引用本文:
周世权; 熊惟皓 . Ti(C,N)/Ni扩散焊接界面的组织和性能[J]. 材料研究学报, 2007, 21(1): 87-91.
1 ZHENG Yong,XIONG Weihao,Microstructure and prop- erties of micron and submicron Ti(C,N) based cermets, Materials Engineering,(5),37(2001) (郑勇,熊惟皓,微米与亚微米Ti(C,N)金属陶瓷的组织与性能,材料工程,(5),37(2001))
2 P.Ettmayer,W.Lengauer,The story of cermets,Powder Met.Int.,21(3),37(1989)
3 LI Xianfen,DING Houfu,XU Daorong,Study on brazing of Ti(C,N) based cermets to 45 steel,Hot Work Technol- ogy,(2),24(2003) (李先芬,丁厚福,徐道荣,Ti(C,N)金属陶瓷与45钢钎焊的研究,热加工工艺,(2),24(2003))
4 LIU Huijie,FENG Jicai,Research status of diffusion bonding of ceramics to metals,Welding & Joining,(9), 7(2000) (刘会杰,冯吉才,陶瓷与金属扩散联结研究现状,焊接,(9), 7(2000))
5 WANG Longbao,LI Aixia,QUAN Mingxiou,BIAN Maoxu,ZHOU Shiquan,GENG Yinyan,Researches on Ni-Cr-P amorphous brazing filler metal by rapid solidifi- cation,Chinese Journal of Materials Research,4,44(1993) (王隆保,李爱霞,全明秀,边茂恕,周石泉,耿银燕,箔状非晶态镍基含磷钎焊料的研究,材料研究学报,4,44(1993))
6 YANG Xinghua,HE Shunyin,CAO Xiaomin,Welding of nickel-based alloy C-276,Welding & Joining,(7),28(2004) (杨兴华,何顺银,曹效民,镍基合金C-276的焊接,焊接,(7), 28(2004))
7 XIONG Weihao,HU Zhenhua,CUI Kun,Transitional layer of phase interfaces in Ti(C,N)-based cermet,Acta Metallurgica Sinica,32(10),1075(1996) (熊惟皓,胡镇华,崔??,Ti(C,N)金属陶瓷相界面过渡层,金属学报,32(10),1075(1996))
8 WANG Quanzhao,LIU Yue,CHEN Zhiliang,BI Jing,Microstructures and mechanical properties of TiC/NiCrMoAlTi cermets,Chinese Journal of Materials Research,19(4),354(2005) (王全兆,刘越,陈志亮,毕敬,TiC/NiCrMoAlTi金属陶瓷的微观结构与力学性能,材料研究学报,19(4),354(2005))
9 XIONG Weihao,HU Zhenhua,CUI Kun,Formation mechanism of microcrystal interface layer in Ti(C,N)- based cermet,Acta Metallurgica Sinica,33(5),473(1997) (熊惟皓,胡镇华,崔??,Ti(C,N)金属陶瓷中微晶界面层的形成机制,金属学报,33(5),473(1997))
10 XIONG Weihao,HU Zhenhua,CUI Kun,Interface behav- ior of carbide in Ti(C,N)-based cermet,Materials Review, 12(2),14(1998) (熊惟皓,胡镇华,崔??,Ti(C,N)金属陶瓷中碳化物的界面行为,材料导报,12(2),14(1998))
11 N.Eustathopoulos,Dynamics of wetting in reactive metal/ceramic systems,Acta Mater.,46(7),2319(1998)
12 T.B.Massalski,H.Okamoto,P.R.Subramanian, L.Kacprazak,Binary Alloy Phase Diagrams,2nd Edition(USA,ASM International,1996) p.315
13 Y.Li,Z.Zou,H.Xiao,A study on microstructure in the brazing interface of WC-TiC-Co hard alloys,Interna- tional Journal of Refractory Metals & Hard Materials,20, 169(2002)
14 G.S.Upadhyaya,Nature and Properties of Refractory Car- bides (New York,Nova Science Publishers,Inc.,1996) p.365
15 F.Qi,S.Kang,A study on microstructural changes in Ti(CN)-NbC-Ni cermets,Materials Science and Engineer- ing,A251,276(1998)
16 Y.Zheng,M.You,W.Xiong,W.Liu,S.Wang,Valence- electron structure and properties of main phases in Ti(C, N)-based cermets,Materials Chemistry and Physics,82, 877(2003)
17 Y.Zheng,W.Xiong,W.Liu,W.Lei,Q.Yuan,Effect of nano addition on the microstructures and mechanical proper- ties of Ti(C,N)-based cermets,Ceramics International, 31,165(2005) |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
