Please wait a minute...
材料研究学报  1991, Vol. 5 Issue (2): 117-123    
  研究论文 本期目录 | 过刊浏览 |
TiFe_xM_y氢化物形成焓的数学模型与计算预报
周自强;冯锋;张金龙;平信义
上海工业大学;上海工业大学;上海工业大学;上海工业大学
A CALCULATION MODEL AND PREDICTION FOR THE ENTHALPY OF FORMATION OF TiFe_xM_y HYDRIDES
ZHOU Ziqiang FENG Feng ZHANG Jinlong PING Xinyi (Shanghai University of Technology)
引用本文:

周自强;冯锋;张金龙;平信义. TiFe_xM_y氢化物形成焓的数学模型与计算预报[J]. 材料研究学报, 1991, 5(2): 117-123.
, , , . A CALCULATION MODEL AND PREDICTION FOR THE ENTHALPY OF FORMATION OF TiFe_xM_y HYDRIDES[J]. Chin J Mater Res, 1991, 5(2): 117-123.

全文: PDF(562 KB)  
摘要: 研究了TiFe_xM_y 合金氢化物(M 代表Mn,Ni,Co,Zr,Nb,V,Cr 和Al,x≥0.5,y≤0.3)分解自由能变化△G 与形成热△H 和元素原子参数间的关系。结果表明;氢化物分解时的△G可以用合金组成元素的原子尺寸因素、元素的平均电负性差和平均外层电子数的半经验方程式来表示,并由此可推出氢化物分解热△H,计算预报值与实际值相符,相差在5kJ(mol H_2)~(-1)以内。比较三参数对△H 的贡献大小表明,TiFe_xM_y 合金的△H 主要受电负性差或电子因素控制。
关键词 计算预报形成焓TiFe_xM_y合金氢化物数学模型    
Abstract:The plateau pressure P_(eq) and the enthalpy of formation △ H ofTiFe_xM_y(Mstands for Mn,Ni,Co,Zr,Nb,V,Crand A1,x≥0.5,y≤0.3)hydrideshave been studied.It is demonstrated that the available experimental information aboutP_(eq) can be experessed as semi-empi
Key wordscalculation prediction    TiFe_xM_y alloy    hydride    enthalpy of formation    mathematical model
收稿日期: 1991-04-25     
基金资助:国家自然科学基金,5870015
1 Bouten P C,Miedema A R.J Less-Common Met,1980;71:147
2 Miedema A R,de Chatel P F.In:Bennett L H ed.Theory of Alloy Phase Formation-Edited,1980:344
3 Lunding C C,Lynch F E,Magee C B.J Less-Common Met,1977;56:19
4 Wicke E.J Less-Common Met,1984;101:17
5 Percheron-Guegan A,Lartigue C,Achard J C.J Less-Common Met,1985;109:287
6 Wang Y B,Northwood D O.J Less-Common Met,1987;135:239
7 Wang Y B,Northwood D O.Materials Science and Technology,1988;4:97
8 Burch R,Mason N B.J Less-Common Met,1979;63:57
9 Bernauer O,Halene C.J Less-Common Met,1987;131:213
10 Zhou Z Q,Zhang H Y.Hydrogen Energy Progress 2,Florida,Pergamon Press,1986:898
11 Zhou Z Q,Tang D G,Zhou D Q,Zhang J L.Paper Presented at llth International Scientific Forum on Energy,1987,to be published in FUELING TE 21ST CENTURY,New York Hemisphere Publishing Corporation,
12 Mintz M H,Vaknin S.J Appl Phys,1981;52(1) :463
13 Wakao S,Sekine M.J Less-Common Met,1983;89:341
14 Hiroshi Nagai,Katsu Kitagaki,Keilichiro Shoji.J Less-Common Met,1987;134:275
15 叶荣、赵施龙、黄铁生、陈炳兆,第一届全国贮氢材料会议论文集,杭州:浙江大学,1981:1
16 Reilly J J.J Phys Chem,1979;117:115
17 Douglas G Ivey,Derek O Northwood.J Materials Science,1983;18:321
18 Sandrock G D,Reilly J J.BNL-22308,1977:1
19 Reilly et al,U S Pat,2922872,Dec.2,1975
20 Reilly J J,Johnson J R.BNL-20791,1976:1
21 Shinar J,Jacob I,Davidov D,Shaltiel D.Andresen A F & Madand A J,Proceedings of an International Symposium held in Geilo,Norway,14-19 Aug 1977;337
22 Huston E L.J Less-Common Met,1980;74:435
23 Komazaki Y,Uchida M,Suda S.J Less-Common Met,1983;89:274
24 Tetsuro Abe,Kazuhide Tanaka et al.Trans of the Japan Inst of Met,1987;28(11) :861
25 Jang T H,Han J I,Lee J Y.J Less-Common Met,1986;119:237
26 Sasaki Y,Amano M.Hydrogen Energy Progress,Proceedings of the 3rd World Hydrogen Energy Conference,Tokyo,Japan,23-26 June 1980
27 李玉凤,徐德明,陈于才.金属学报,1983;19(5) :A403
28 王启东,吴京,潘颐,陈长聘.第一届全国贮氢材料会议论文集,杭州:浙江大学,1981:1
29 Shilov A L.Kost ME,Kuznrtsov N T.J Less-Common Met,1985;105:221
30 张慧友,陈鉴寅等.上海工业大学内部资料.1987
31 Lim S H,Lee J Y:J Less-Common Met,1984;97:65
[1] 朱良,王晶,李晓慧,锁红波,张亦良. 基于堆焊成形钛合金高周疲劳实验数据的R-S-N模型[J]. 材料研究学报, 2015, 29(9): 714-720.
[2] 丁锐 李相波, 王佳, 许立坤. 冷喷涂Cu-Cu2O涂层在海水中的电化学行为[J]. 材料研究学报, 2013, 27(2): 212-218.
[3] 陈伟, 杨小军, 王培, 罗刚, 陈德敏, 杨柯. La1-xYxNi4.8Mn0.2合金的储氢性能*[J]. 材料研究学报, 2013, 27(1): 1-6.
[4] 唐睿 杨晓雪. N18、Zry--4和M5锆合金中氢的固溶度[J]. 材料研究学报, 2009, 23(6): 635-639.
[5] 贾玉玺; 原波; 杨俊英; 安立佳 . 树脂传递模塑过程的数学描述和数值模拟进展[J]. 材料研究学报, 2005, 19(5): 449-456.
[6] 张彩碚;赖祖涵;计容;于瀛大. α—Ti氢处理后的组织结构与性能[J]. 材料研究学报, 1993, 7(6): 461-466.
[7] 阎牧夫;刘志儒;祖国成. 气体渗碳过程表面碳浓度增长的数学模型[J]. 材料研究学报, 1992, 6(3): 223-226.
[8] 宫波;戢景文;赖祖涵. Ti—H 合金的相变内耗[J]. 材料研究学报, 1991, 5(1): 11-15.