|
|
|
| 可交联硅烷接枝聚乙烯共混物的性能 |
| 李忠明; 杨鸣波; 冯建民; 龚风鸣; 周卫国;李明新 |
| 四川大学 |
|
引用本文:
李忠明; 杨鸣波; 冯建民; 龚风鸣; 周卫国; 李明新 . 可交联硅烷接枝聚乙烯共混物的性能[J]. 材料研究学报, 2002, 16(3): 303-306.
1 V.Latysh,Gy.Krallics,I.Alexandrov,A.Fodor,Applica- tion of bulk nanostructured materials in medicine,Current Applied Physics,6,262(2006)
2 ZHANG Yumei,GUO Tianwen,The researches on tita- nium and titanium alloy in dental use,Journal of Bio- medical Engineering,17(2),206(2000) (张玉梅，郭天文，钛及钛合金在口腔科应用的研究方向，生物医学工程学杂志，17(2)，206(2000))
3 NING Chongqin,ZHOU Yu,Development and research status of biomedical titanium alloys,Material Science and Technology,3(10),100(2002) (宁聪琴，周玉，医用钛合金的发展及研究现状，材料科学与工艺，3(10)，100(2002))
4 M.Long,H.J.Rack,Titanium alloys in total joint replacement-a materials science perspective,Biomaterials, 19,1621(1998)
5 B.S.Lee,M.H.Kim,S.K.Hwang,S.I.Kwun,S.W.Chae, Grain refinement of commercially pure zirconium by ECAP and subsequent intermediate heat treatment, Mater.Sci.Eng,303,1087(2007)
6 R.Z.Valiev,R.K.Islamgaliev,I.V.Alexandrov,Bulk nanos- tructured materials from severe plastic deformation, Progress in Materials Science,45,103(2000)
7 M.Furukawa,Z.Horita,M.Nemoto,T.G.Longdon,Review processing of metals by equal channel angular pressing, Journal of Mater.Sci.,36,2835(2001)
8 ZHENG Lijing,CHEN Changqi,ZHOU Tietan,LIU Peiy- ing,ZENG Meiguang,Grain-refining mechanism of ECAP and its effect on microstructures and mechanical proper- ties of pure Al,Rare Metal Materials and Engineering, 33(12),1325(2004) (郑立静，陈昌麒，周铁涛，刘培英，曾梅光，ECAP细晶机制及对纯铝显微组织和力学性能的影响，稀有金属材料与工程，33(12)，1325(2004))
9 SHI Fengjian,WANG Jianmin,XU Xiaojing,Study on recrystallization behavior of ultra-fine grain Copper fab- ricated by equal channel angular pressing,Hot Working Techonology,(12),24(2005) (石凤健，汪建敏，许晓静，ECAP法制备超细晶铜的再结晶行为研究，热加工工艺，(12)，24(2005))
10 ZHAO Xicheng,YAO Xiaochun,LIU Xiaoyan,Effects of ECAP on microstructures and mechanical properties of 20mnsi steel,Journal of Materials Science and Engineer- ing,24(3),396(2006) (赵西成，姚筱春，刘晓燕，ECAP变形对钢组织与性能的影响，材料科学与工程学报，24(3)，396(2006))
11 V.V.Stolyarov,Y.T.Zhu,I.V.Alexandrov,T.C.Lowe, R.Z.Valiev,Influence of ECAP routes on the microstruc- ture and properties of pure Ti,Mater.Sci.Eng.,299A, 59(2001)
12 V.V.Stolyarov,Y.T.Zhu,T.C.Lowe,R.Z.Valiev,Mi- crostructure and properties of pure Ti processed by ECAP and cold extrusion,Mater.Sci.Eng.,303A,82(2001)
13 V.V.Stolyarov,Y.T.Zhu,I.V.Alexandrov,T.C.Lowe, R.Z.Valiev,Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling,Mater.Sci. Eng.,343A,43(2003)
14 I.Kim,J.Kim,D.H.Shin,C.S.Lee,S.K.Hwang,Effects of equal channel angular pressing temperature on deforma- tion structures of pure Ti,Mater.Sci.Eng.,342A, 302(2003)
15 FU Wenjie,ZHAO Xicheng,YANG Xirong,ZHENG Yanxia,Microstructure and properties of titanium processed by equal channel angular pressing at room tem- perature,Hot Working Techonolog,36(18),21(2007) (付文杰，赵西成，杨西荣，郑艳霞，室温等径弯曲通道变形工业纯钛的组织及性能研究，热加工工艺，36(18)，21(2007))
16 Y.Iwahashi,J.Wang,Z.Horita,Principle of equal chan- nel angular pressing for the processing of ultrafine grained materials,Scr.Mater.,35,143(1996)r |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
