热处理工艺对高成型性0.1%C-3%Mn中锰钢组织和性能的影响
Effect of Heat Treatment Process on Microstructure and Properties of a 0.1%C-3% Mn Medium Manganese Steel of High-formability
热处理工艺对高成型性0.1%C-3%Mn中锰钢组织和性能的影响 |
| 周永浪, 王官涛, 王立军, 刘春明 |
|
Effect of Heat Treatment Process on Microstructure and Properties of a 0.1%C-3% Mn Medium Manganese Steel of High-formability |
| ZHOU Yonglang, WANG Guantao, WANG Lijun, LIU Chunming |
| 图7 实验钢经740℃×0.5 h+670℃×1.0 h处理后的EBSD图 |
| Fig.7 Phase map (a) for BCC (red) and FCC (blue) phases, inverse pole figure (IPF) map (b) of sample subjected to two-step ART treatment: 740℃×0.5 h+670℃×1.0 h |
|
|