热处理工艺对高成型性0.1%C-3%Mn中锰钢组织和性能的影响
Effect of Heat Treatment Process on Microstructure and Properties of a 0.1%C-3% Mn Medium Manganese Steel of High-formability
热处理工艺对高成型性0.1%C-3%Mn中锰钢组织和性能的影响 |
| 周永浪, 王官涛, 王立军, 刘春明 |
|
Effect of Heat Treatment Process on Microstructure and Properties of a 0.1%C-3% Mn Medium Manganese Steel of High-formability |
| ZHOU Yonglang, WANG Guantao, WANG Lijun, LIU Chunming |
| 图1 实验钢的热轧态显微组织以及热膨胀模拟试样的显微组织和膨胀曲线 |
| Fig.1 Microstructures of hot-rolled plate (a) and microstructures (b) and dilatation curve (c) of thermal dilatation simulation sample after cooling at 0.5℃/s, during cooling stage revealing the phase transiformation |
|
|