粉末冶金多孔高氮奥氏体不锈钢的制备及性能
胡玲1,李烈军1(
),彭翰林2,倪东惠1,陈松军1,张伟鹏1
),彭翰林2,倪东惠1,陈松军1,张伟鹏1
Fabrication and Properties of Powder Metallurgical Porous High Nitrogen Austenitic Stainless Steel
Ling HU1,Liejun LI1(),Hanlin PENG2,Tungwai NGAI1,Songjun CHEN1,Weipeng ZHANG1
),Hanlin PENG2,Tungwai NGAI1,Songjun CHEN1,Weipeng ZHANG1
图1. 原始粉末的SEM形貌和粉末颗粒的直径分布
Fig.1. SEM morphology (a) and particle size distri-bution (b) of the as-received powders
