粉末冶金多孔高氮奥氏体不锈钢的制备及性能
胡玲1,李烈军1(
),彭翰林2,倪东惠1,陈松军1,张伟鹏1
),彭翰林2,倪东惠1,陈松军1,张伟鹏1
Fabrication and Properties of Powder Metallurgical Porous High Nitrogen Austenitic Stainless Steel
Ling HU1,Liejun LI1(),Hanlin PENG2,Tungwai NGAI1,Songjun CHEN1,Weipeng ZHANG1
),Hanlin PENG2,Tungwai NGAI1,Songjun CHEN1,Weipeng ZHANG1
图5. 孔隙率和烧结温度对多孔高氮奥氏体不锈钢在浓度为0.9%的NaCl溶液中极化曲线的影响
Fig.5. Influence of the porosity and sintering temperature on the anodic polarization curves in 0.9% NaCl solution of the as-fabricated porous materials
