双连续Si3N4/1Cr18Ni9Ti复合材料的制备和冲蚀性能
杜奇1,2,高勇1,任志恒1,3,曹小明1,王超1,张劲松1(
)
)
Preparation and Erosion Performance for Co-continuous Phase Composites of Si3N4/1Cr18Ni9Ti
Qi DU1,2,Yong GAO1,Zhiheng REN1,3,Xiaoming CAO1,Chao WANG1,Jinsong ZHANG1()
)
图1. 冲蚀磨损试验装置的示意图
Fig.1. Sketch of the slurry erosion equipment (a) rotating disk equipment 1-motor, 2-container, 3-disc, 4-baffle, 5-specimen holder, 6-circulating water pipe, 7-cooling bath, 8-circulating pump, 9-holder, 10-jack (b) spacemen holder in (a) 1-nylon holder, 2- location bolt, 3-specimen, 4-disc, 5-junk ring, 6-specimen holder
