压铸压室内部界面传热反算模型的建立和应用*
曹永友,熊守美,郭志鹏(
)
)
DEVELOPMENT OF AN INVERSE HEAT TRANSFER MODEL BETWEEN MELT AND SHOT SLEEVE AND ITS APPLICATION IN HIGH PRESSURE DIE CASTING PROCESS
Yongyou CAO,Shoumei XIONG,Zhipeng GUO()
)
图3. 静态无压射条件下8个连续浇注循环中压室S2, S5和S10位置距离界面1 mm处的测量温度
Fig.3. Sequence temperatures measured at 1 mm from the interface at S2, S5 and S10 during 8 cycles under the non-shot condition
